Pololu A-Star 32U4 Prime SV
La A-Star 32U4 Prime SV è una scheda programmabile basata sul microcontrollore AVR ATmega32U4, nel comune formato Arduino. Rispetto alle schede concorrenti offre una gestione dell’alimentazione superiore, con un regolatore switching step-down che consente un funzionamento efficiente da un’ampia gamma di tensioni di ingresso.
Programmabile tramite USB con l’IDE Arduino, è adatta al controllo di servo, sensori e piccoli robot.
Specifiche
- Brand: Pololu
- Manufacturer Part Number: 3113
- Processor: ATmega32U4 @ 16 MHz
- Clock: 16 MHz Crystal
- User I/O lines: 26
- PWM Outputs: 7
- Analog Inputs: 12
- Ground Access Points: 43
- USB Connector: Micro-B
- Recommended Input Voltage: 5 – 36VDCNote: Batteries can have much higher voltages than their nominal voltages when fully charged, so be careful with nominal voltages above 24 V. A 36 V battery is not appropriate for this product.
- Peso: 19g
- RAM Size: 2560 bytes
- Program Memory Size: 32 KBNote: 4 KB of the MCU’s 32 KB of flash memory is used by the pre-installed USB bootloader. All 32 KB is available when programming via the ISP header rather than the bootloader.
- Barrel Jack Size: 2.1mm x 5.5mm




